Initializing...
Preview
TEBEB 3000-080

TEBEB 3000-080

The TEBEB counterbalance cylinders are cylinders with ears (with spherical plain bearings) both at the tube and on the piston rod and stroke lenght up till 300mm.
The cylinders are for counterbalance or if a holding force is needed, in various type of applications. The cylinders should always be built in and fixed both at the tube and piston rod side.

Note! The gas springs are not to be exposed to any pulling forces. If needed a mechanical stop must be installed to prevent this from happening.
alternative text for dual seal imageOverload protection system icon

Diagram / specifications section

Preview
L minMinimum Length (in)9.45
SStroke Length (in)3.15
LTotal Length (in)12.6

Item specifications

  • End Force At Full Stroke (LBF)10341.21
  • Force Increase By Temperature Percent Per (°F)0.17
  • Gas Volume (CuF)0.016244747
  • Initial Force at max. pressure (lbf) 6744.27
  • Max Charging Pressure (Psi)2175
  • Max Piston Rod Velocity (FtMin)157.48
  • Max. Operating Temperature (F)176
  • Min Charging Pressure (PSI)362
  • Min. Operating Temperature (F)32
  • Recommended Max Strokes Per Minute~15-40
  • Weight (lb)21.758

Accessories

Similar items

TEBT 3000-080
TEBT 3000-080
TEBT 3000-080
KF2 5000-080-NC
KF2 5000-080-NC
KF2 5000-080-NC
KF2 5000-080
KF2 5000-080
KF2 5000-080
TUR 10000-080
TUR 10000-080
TUR 10000-080
LCF 10000-080
LCF 10000-080
LCF 10000-080
TU 10000-080
TU 10000-080
TU 10000-080
KF2 5000-080-CJ
KF2 5000-080-CJ
KF2 5000-080-CJ