Preview
M2-50-Red
The M2 is available in four preset models, with initial forces from 500 to 2000 N. The body of the spring and the mount are designed to meet the ISO-dimension found in ISO 11901 as well as in VDI 3003. Each spring is color-coded for easy identification of force rating.
We also offer a model with adjustable force (black) that can be customised to meet individual force requirements. The adjustable model may be set to desired pressure when ordered from us or by customers with charging equipment.
The M2 spring can in many cases directly replace mechanical die springs of 25 mm (1 inch) diameter.
All M2 springs can be repaired and recharged. The spring can be attached to the tool, using a mount (FCR or SM). The M6 thread in the base of the spring is used for charging and is also a mounting option.
Diagram / specifications section
Preview
| L min | Minimum Length (in) | 3.62 |
| S | Stroke Length (in) | 1.97 |
| L | Total Length (in) | 5.59 |
Item specifications
- Charging Pressure (Psi)1958
- End Force At Full Stroke (LBF)695
- Force Increase By Temperature Percent Per (°F)0.17
- Gas Volume (CuF)0.000670979
- Initial Force at max. pressure (lbf) 340
- Max Charging Pressure (Psi)2610
- Max Piston Rod Velocity (FtMin)314.96
- Max. Operating Temperature (F)176
- Min Charging Pressure (PSI)362
- Min. Operating Temperature (F)32
- Recommended Max Strokes Per Minute~80-100
- Weight (lb)0.484
